Antec Fusion Remote Black
System I used in this case was:
- AMD X2 4850e with Scythe Ninja Mini (no fan)
- Gigabyte GA-MA78GM-S2H (gpu onboard)
- 2x2GB + 1x1GB Corsair XMS2 Xtreme TwinX DDR2 PC6400/800MHz
- Samsung HD300LD 300GB IDE
- Western Digital Raptor WD1500ADFD 150GB SATA
- FSP Group 350PNF 350W
I must say that I’m impressed with this case, it has a smart inside chamber layout. There are no vibrations in the case at all from my raptor drive or from the other disk drive.
Also my AMD X2 4850e can be stripped down of the fan and only use the heatsink because the fans on the side is close enough to extract the warm air out of the case, the “air guides” also does it’s job with guiding cold fresh air through the heatsink.
The LCD panel and remote control is working fine, with iMedian software and Microsoft Media Center.
If you’re looking for a Media Center case for MicroAtx motherboards, this is one for you! 
The power led is lit and news is rolling on the LCD panel.
Finally we would like to thank both Antec and the Swedish PR agency LEWIS PR for sending us the sample.
Navigation
- 1. Introduction
- 2. Outside and details
- 3. On the inside
- 4. Installation
- 5. Final images & Conclusion
